Before installing floor heating, we must first choose the floor heating that we are satisfied with. The floor heating should be easy to use and of good quality. However, when selecting floor heating, many people are prone to misunderstanding. Let us first understand the selection of floor heating to avoid selection When I was unable to start or pick, I went into the minefield instead.
When installing floor heating, it is necessary to plan for installation safety. Installing floor heating does not require layout. On the contrary, the floor heating installation layout needs to be meticulous. Consider the floor heating layout according to the area used and the insulation effect of the room. At the same time, according to the principle of radiation to provide the most appropriate heat dissipation to the room, accurate calculations are performed to achieve the requirements of achieving the best results with the fewest pipes. Therefore, the use of underfloor heating is not as dense as possible. If the space between the underfloor heating plates is too high, it will cause the indoor temperature to be too high and cause hotness, and on the contrary, it will affect human health. At the same time, installing floor heating does not mean that you cannot install air conditioners, because floor heating can only obtain the effect of heating, and when cooling is required in summer, we still need our air conditioner to generate power, so it must be appropriate in home Install air conditioners to avoid surprises when they heat up.
After the floor heating is installed, the next work is acceptance. The acceptance is simpler than the first two steps, but it requires more professionalism. Generally, at the time of acceptance, the surface temperature is not as high as possible. In order to save energy and also for our health, generally the surface temperature should not exceed 28 degrees. Otherwise, it will easily cause a variety of diseases and will force people. Human blood vessels are dilated, so the temperature of floor heating is also limited. Underfloor heating is not as fast as he can heat up. Many owners think that the faster the temperature is, the better the quality is because they are not professional. In fact, the warming up of the floor heating will accelerate the ground and the room. Service life.
Many owners think that the floor heating should be moist and the floor surface should be warm and dry. In fact, this is not the case. The floor heating uses heating cables to heat the room and passes through the floor to allow the room to heat. Therefore, generally larger spaces use floor heating. Suitable, below 60 square meters, it is not recommended to use floor heating to avoid excessive waste. Some people think that copper radiators used in floor heating are more resistant to corrosion and better in quality. In fact, copper radiators encounter sulfur in the soil, and often the sulfur content in the soil is too large, which is easy. Cause corrosion. Therefore, if a copper radiator is used, it needs to be cleaned regularly to avoid sulfur corrosion.