With the emergence of a large number of modern large-scale building systems in our country, fastener-type steel pipe scaffolds can no longer meet the needs of the development of building construction. It is imperative to vigorously develop and promote the application of new scaffolding. Practice has proved that the new type of scaffolding is not only reliable in construction and fast in assembly and disassembly, but also reduces the amount of steel used in scaffolding by 33%, and improves the efficiency of assembly and disassembly by more than twice. The construction cost can be significantly reduced.
Mobile scaffolding refers to various supports erected at the construction site for workers to operate and solve vertical and horizontal transportation. Chongqing Steel Pipe Frame Construction Company pointed out that it has the characteristics of simple disassembly and assembly, good load-bearing performance and reliable use. It's developing very fast. Among the various new types of stents, mobile stents have developed early and are used in large quantities.
Mobile scaffolding was first developed in other regions. By the early 1960s, such scaffoldings had been applied and developed in Europe and Japan. Since the end of the 1970s, China has introduced and used such scaffolding from Japan, Britain and other regions.
Chongqing Scaffolding Construction Company will tell you about the main parts and options of mobile scaffolding:
The mobile scaffold is mainly composed of a main frame, a horizontal frame, a cross diagonal brace, a scaffolding board, and an adjustable base. Cross rods are also called diagonal rods, and the mobile scaffolding is a cross-type rod that connects two pairs of masts vertically. The flattened parts at both ends of the rod are punched with pin holes, which are locked with the locking pins on the mast's vertical pole during assembly. Surface treatment: electroplated (cold galvanized), dip galvanized (hot galvanized) casters: also known as ground wheels, which can be installed under the mobile scaffold to form a mobile scaffold. It can be used as electromechanical installation. Paint painting. Equipment maintenance. Advertising production Mobile work platform. Casters are 6 inches with brakes, which is easy to use. Flexible and reliable. Mobile scaffolding is optional:
1. Pay attention to the material of scaffold wheels. The materials of general scaffolding wheels are PU, tpr, etc.
2. Bracket selection: divided into directional and universal, the material is generally carbon steel, which can be used for various electroplating, such as zinc plating, copper plating, nickel plating, chrome plating, spraying, etc., also stainless steel,
3. Arrangement of casters on the equipment: The arrangement is different, which not only affects the cost, but also the feeling of pushing is greatly different.
4. Installation method: In general, light loads can be used with screw rods, insert rods, expansion rubber sleeves, etc., and heavy loads are using the base plate, or directly welded to the equipment. The installation methods of large companies are usually very rich.
5. Pay attention to the load of scaffolding. For casters of the same diameter, manufacturers generally produce several series for different load bearing. Insufficient load, resulting in greatly reduced caster life or accidents
6, look at the size. Generally, the larger the caster diameter, the less effort it takes to push, and the better the obstacle resistance.